KN NaK filled Melt pressure transmitters
The KN Series are for use in high temperature applications where the process temperatures may reach 538 °C (1000 °F) such as high temperature engine
The KN Series are for use in high temperature applications where the process temperatures may reach 538 °C (1000 °F) such as high temperature engine
The K3 Series are pressure sensors for use in high temperature applications where the process temperatures may reach 538 °C (1000 °F) such as high temperature engineer
The K3 Series are pressure sensors for use in high temperature applications where the process temperatures may reach 538 °C (1000 °F) such as high temperature engineer
The "IMPACT" series of Gefran are pressure transmitters, without transmission fluid, for using in high temperature environment (350°C). Medium pressure is tran.
The "IMPACT" series of Gefran are pressure transmitters, without transmission fluid, for using in high temperature environment (350°C). Medium pressure is tran.
The IMPACT series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is transf.
The IMPACT series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is transferred
The IMPACT series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is tra.
Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Strain gag
(*) available for ranges > to 100bar (*) not available for version ME3
Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Strain gag
Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Extensimetric m
Digital output signal with DP404 CAN OPEN communication protocol Transmiss
Pressure ranges of 1500 bar, 2000 bar and 2500 bar for dynamic applications
Pressure ranges: 0-25 to 0-2000bar / 0-360 to 0-30000psi Extensimetric mea
All models are rugged, totally self-contained, and allow the user to benefit from the improved efficiency and quality that goes with pressure monitoring. The Gefran melt.
The M6 Series has an improved digital readout utilizing an extra-large five-digit display. The M6 Series melt pressure gauge provides reliable, maintenance-free, localiz.
The entire amplifier/sensor assembly of an MF Series Melt Pressure Transmitter is packaged in a stainless steel welded enclosure with a conduit cable fitting. This metal.
Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gag
Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gag
Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gag
Digital output signal with DP404 CAN OPEN communication protocol Transmiss
Pressure ranges: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Extensimetric m
The W6 Series has an improved digital readout utilizing an extra-large five-digit display. The W6 Series melt pressure gauge provides reliable, maintenance-free, localiz.
The entire amplifier/sensor assembly of an WF Series Melt Pressure Transmitter is packaged in a stainless steel welded enclosure with a conduit cable fitting. This metal.
The CAN OPEN module interface for non-amplified transducers has been developed to acquire low level signals from strain gage bridges (load cells, pressure transducers) a
The TS3 simulates the output of a Gefran mV/V melt pressure transducer (M3 and W3 series) at various pressure levels. The TS3 simulates any strain gage-based transducer
Indicator Displays pressure in a 5-digit LED display Auto zero Auto span Auto calibration
Indicator Economically priced Displays pressure in a 5-digit LED display Auto zero Auto s
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s
Indicator Economically priced Displays pressure in a 5-digit LED display Auto zero Auto s
Indicator Economically priced Displays pressure in a 5-digit LED display Auto zero Auto s
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s
Rupture disks, also known as burst plugs or soft plugs, are used for emergency pressure relief of an extruder. They are designed to instantaneously rupture at a sp.
The Cleaning Tool Kit is used to remove excess plastic from transducer mounting holes prior to installation. Installation of transducers into plugged and/or dirty mounti.
A properly machined mounting hole is vital to optimal operation of a melt pressure transducer or transmitter. Poorly machined holes can result in damage that causes unre.
Use to connect Gefran ISI, Inc. transducer to indicators
Contactless linear position transducer with magnetostrictive technology. The absence of electrical contact on the cursor eliminates all wear and guarantees almost.
Contactless linear position transducer with magnetostrictive technology with Start/Stop or PWM digital output interface. The absence of electrical contact on the cursor
Contactless magnetostrictive linear position transducer with RS422-SSI digital output interface. The absence of electrical contact on the cursor eliminates all wear and
Contactless absolute linear displacement transducer with magnetostrictive technology. The Profibus fieldbus communication interface permits integration in complex system.
Contactless linear position transducer with magnetostrictive technology. The absence of electrical contact on the cursor eliminates all wear and guarantees almost unlimi.
Contactless linear position transducer with magnetostrictive technology: the absence of electrical contact on the cursor eliminates problems of wear and consumption and
Contactless linear position transducer with magnetostrictive technology: the absence of electrical contact on the cursor eliminates problems of wear and consumption and
Contactless magnetostrictive linear position transducer with RS422-SSI digital output interface. The absence of electrical contact on the cursor eliminates all wear and guarantees almost unlimi.
The IK4 CANopen integrates a microprocessor to process the measurement and to diagnose the transducer. The CAN field bus communication system provides fast and safe tran.
Contactless linear position transducer with magnetostrictive technology. The analog interface, available with various output ranges in voltage or in current, guarantees
Contactless absolute linear displacement transducer with magnetostrictive technology. The Profibus fieldbus communication interface permits integration in complex system.
The transducer has been improved in order to guarantee greater reliability under all con
50 to 750 mm stroke Mechanical fixing and selfaligning linkage using 2 bal
The transducer has been improved in order to guarantee greater reliability under all con
25 to 150 mm stroke Mechanical linkage using joint with take-up of play, M
25 to 150 mm stroke Mechanical linkage using joint with take up of play, M
10 to 100 mm stroke Double support of the control rod and return spring
10 to 50 mm stroke Double support of the control rod and return spring
The 1/2†cylindrical housing, plus the option of all fastening systems (brackets, joi
25 to 300 mm stroke Mechanical fixing using brackets, selfaligning ball-jo
50 to 1000 mm strokes Cursor magnetic drag Independent linea
Strokes from 50 to 1000 mm Magnetic pulling of cursor Mechan
100 to 550 mm stroke Mechanical fixing by internal or external flange
This transducer is designed to guarantee a high protection level (IP67) in applicati
The PC67 displacement transducer was developed to guarantee a high protection level (IP6
This transducer is designed to guarantee a high protection level (IP67) in applications
>This transducer is designed to guarantee a high protection level (IP67) in applications
Rectilinear displacement transducer without drag shaft, completely water-tight (IP67), d
The PMI-SL transducer, an evolution of the PMI-12, is designed for all inside cylinder a
The PMI-SLE transducer, is the amplified version of the PMI-SL, a product designed for a
Models 09, 11, 20 Servo mounting Independent linearity up to
Sealed industrial version Independent linearity up to ± 0. 05% (standa.
Monodirectional encoder with position hysteresis; outputs x1, x2, x4 (EG01)
Tachometer with analogue output proportional to the speed and digital output
The signal conditioner with 0. .
The PCIR signal conditioners have been designed to enable the user to adapt the output impedance of linear or rotative displacement transducers in conductive plastic for
Max. temperature limit: -40...+250 °C (see table for thermocouple cable used)
Max. temperature limit: - 40 ... + 310 °C for type T - 40 ... + 550
Temperature limits: -40 . .
Temperature limits:: - 40 . .
Temperature limits: -40 . .
Max. temperature limit: - 40 .
Max. temperature limit: - 40 .
Max. temperature limit: type J: - 40 .
Max. temperature limit: - 40 .
Temperature limits: -40 . .
Temperature limits: -40 . .
Temperature limits: - 40 ... +250 °C Tolerance: Norme UNI 7938
Temperature limits: - 40 . .
Amplified output signal o Temperature limits: -40 ... +350 °C for type T
Temperature limits: - 40 . .
Temperature limits: -40 . .
Amplified output signal Temperature limits: -40 . .
Temperature limits: -40 . .
Temperature limits: -40 . .
Amplified output signal Temperature limits: - 40 ... + 750 ° C
Temperature limits: - 40 ... + 1200 ° C for type K 0 ... + 1400 ° C
Amplified output signal Temperature limits: -40 . .
Temperature limits: -40 . .
Max. temperature limit: - 40 .
Temperature limits: -40 . .
Temperature limits: - 200 ... +600 °C Tolerance: UNI 7937, IEC
Temperature limits: -40 . .
Temperature limits: -40 . .
Temperature limits: - 40 . .
Temperature limits: -40 . .
Temperature limits: - 40 . .
Temperature Limits: -200 ... +600 ° C Tolerance: UNI 7937, IEC
Temperature limits: -200 . .
Temperature Limits: -200 . .
Amplified output signal Temperature limits: -200 . .
Temperature limits: - 200 ... +800 °C Tolerance: UNI 7937, IEC
Max. temperature limit: - 40 .
Max. temperature limit: - 40 .
Extension and compensation cables for Thermocouples Protective sheathings
TR series force transducers are used to measure the tension that plastic films or tapes exert on the guide rollers of the machinery used to coil them. Mounted at
CM series load cells are strain gauge transducers used to measure loads in static and dynamic applications, in compression, with high accuracy. They are machined
The CU range of load cells are designed for the measurement of static or dynamic loads in compression. All the transducers are calibrated as load cells in units o.
The AM force transducers series have been designed to measure static and dynamic compression forces. They are particularly suitable for monitoring pounding operat.
TC series load cells are strain gauge transducers used to measure loads in static and dynamic applications, in tension and compression, with high accuracy (industrial we
The TU range of load cells are designed for the measurement of static or dynamic loads in compression or traction. All the transducers are calibrated as load cell.
The TH series force transducers are ideal for systems that measure tension or compression force in industrial applications, where accuracy and reliability are important,
The CC force transducers have been designed for use in the plastics industry where it is required to measure the reaction force to the extrusion pressure that is present
The CT series force transducers, have been specially designed for use in polymer processing in applications where it is required to measure the reaction force produced b
The principle of measurement of the SB series of load cells is the deformation caused by the shear generated by the applied load. They are compact load cells with an all.
The principle of measurement of the SH series load cells is the deformation caused by the shear generated by the applied load. The result is a transducer that is e.
CB series load cells are designed for trouble free application in industrial environments. The cell body and the protective bellows of the strain gauge are in cor.
The OC series load cells have been designed for all applications requiring accurate weighing of loads on a platform, as well as for general applications in conformity wi
The OD series load cells have been designed for all applications requiring accurate weighing of loads on a platform, as well as for general applications in conformity wi
The CIR-D voltage or current amplifiers have been designed to enable the user to adapt non-amplified strain gauge transducers (load cells, pressure transducers) to acqui
The CIR voltage or current amplifiers have been designed to enable the user to adapt non-amplified strain gauge transducers (load cells, pressure transducers) to acquisi
TK transmitters are based on the thick film extensimetric. Thanks to highly stable electronic components, these transmitters can be used in applications requiring.
Series TSA transmitters are based on silicon piezoresistive sensing element in wheatstone bridge configuration. Thanks to highly stable electronic components, th.
TPF Series flush diaphragm pressure transducers are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 PH st.
Series TPSA transmitters are based on the extensimetric measurement principle. An innovative mechanical structure makes the transducer completely insensitive to t.
Series TPH transducers are designed for applications in high-pressure hydraulic circuits. It uses the extensimetric measurement principle with photo-engraved met.
Series TPHA transmitters are designed for applications in high-pressure hydraulic circuits. It uses the extensimetric measurement principle with photoengraved met.
The XSA transducers are based on the piezoresistive measurement principle. The mechanical structure makes the transducer insensitive during the tightening phase.
The XPSA transducers are based on the extensimetric measurement principle. The mechanical structure makes the transducer insensitive during the tightening phase.
Series TPS transducers are based on the extensimetric measurement principle with strain gauges on metal base. An innovative mechanical structure makes the transd.
The model TDP plug-in display is a universal local display suitable for use with various transmitters. The transmitter must be fitted with an analogue output and a conne.
Digital “Autozero & Span†option makes the pressure transmitter TK Series a product extremely innovative and versatile. Designed thanks to the advanced electronics u.
Digital “Autozero & Span†option makes the pressure transmitter TPSA Series a product extremely innovative and versatile. Designed thanks to the advanced electronics.
TPFADA Series flush diaphragm pressure transmitters are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 P.
