KN NaK filled Melt pressure transmitters
The KN Series are for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engine...view detail...
KE NaK filled Melt pressure transmitters
The K3 Series are pressure sensors for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineer...view detail...
K3 NaK filled Melt pressure transmitters
The K3 Series are pressure sensors for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineer...view detail...
IN Melt pressure transmitters - Voltage Output
The "IMPACT" series of Gefran are pressure transmitters, without transmission fluid, for using in high temperature environment (350°C). Medium pressure is tra...view detail...
IE Melt pressure transmitters - Output 4...20mA
The "IMPACT" series of Gefran are pressure transmitters, without transmission fluid, for using in high temperature environment (350°C). Medium pressure is tra...view detail...
IJ Melt Pressure Transducer for Injection - Output 0-10v Or Canopen
The “IMPACT” series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is tr...view detail...
I3 Melt Pressure Transmitters - mV/V Output
The “IMPACT” series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is transfer...view detail...
IX Melt pressure transmitters - potentially explosive atmospheres
The “IMPACT” series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is...view detail...
M3 Melt pressure transducers - mV / V output
Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Strain gag...view detail...
ME Melt pressure transmitters - 4...20mA output
(*) available for ranges > to 100bar (*) not available for version ME3 ...view detail...
MN Melt pressure transmitters - Voltage output
Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Strain gag...view detail...
MX Melt pressure transmitters for applications in potentially explosive atmospheres
Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi Extensimetric m...view detail...
MD Melt pressure transducers - DP404 CAN OPEN digital output
Digital output signal with DP404 CAN OPEN communication protocol Transmiss...view detail...
MJ Injection melt pressure sensor Output 0-10V or CANopen
Pressure ranges of 1500 bar, 2000 bar and 2500 bar for dynamic applications ...view detail...
Pressure ranges: 0-25 to 0-2000bar / 0-360 to 0-30000psi Extensimetric mea...view detail...
M5 Mechanical Melt Pressure Gauge
All models are rugged, totally self-contained, and allow the user to benefit from the improved efficiency and quality that goes with pressure monitoring. The Gefran melt...view detail...
M6 Digital Melt Pressure Gauge - 4-20 mA Retransmission
The M6 Series has an improved digital readout utilizing an extra-large five-digit display. The M6 Series melt pressure gauge provides reliable, maintenance-free, localiz...view detail...
MFx Explosionproof Melt Pressure Transmitter - 2-wire 4-20 mA
The entire amplifier/sensor assembly of an MF Series Melt Pressure Transmitter is packaged in a stainless steel welded enclosure with a conduit cable fitting. This metal...view detail...
W3 Oil-filled melt pressure transducers - mV / V output
Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gag...view detail...
WE Oil-filled melt pressure transmitters - 4...20mA output
Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gag...view detail...
WN Oil-filled melt pressure transmitters - Voltage output
Pressure ranges from: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Strain gag...view detail...
WD Oil-filled melt pressure transducers - DP404 CAN OPEN digital output
Digital output signal with DP404 CAN OPEN communication protocol Transmiss...view detail...
WX Oil-filled Melt pressure transmitters for applications in potentially explosive atmospheres
Pressure ranges: 0-35 to 0-1000 bar / 0-500 to 0-15000 psi Extensimetric m...view detail...
W6 Series - Digital Melt Pressure Gauge (Oil-filled) - 4-20 mA Retransmission
The W6 Series has an improved digital readout utilizing an extra-large five-digit display. The W6 Series melt pressure gauge provides reliable, maintenance-free, localiz...view detail...
WFx Explosionproof Melt Pressure Transmitter (Oil-filled) - 2-wire 4-20 mA
The entire amplifier/sensor assembly of an WF Series Melt Pressure Transmitter is packaged in a stainless steel welded enclosure with a conduit cable fitting. This metal...view detail...
CMI Can-open module interface for non-amplified transducers
The CAN OPEN module interface for non-amplified transducers has been developed to acquire low level signals from strain gage bridges (load cells, pressure transducers) a...view detail...
TS3 3.3 mV/V Transducer Simulator
The TS3 simulates the output of a Gefran mV/V melt pressure transducer (M3 and W3 series) at various pressure levels. The TS3 simulates any strain gage-based transducer ...view detail...
M0 Melt Pressure Control System (1/4 DIN)
Indicator Displays pressure in a 5-digit LED display Auto zero Auto span Auto calibration...view detail...
M7 Melt Pressure Monitoring System (1/8 DIN)
Indicator Economically priced Displays pressure in a 5-digit LED display Auto zero Auto s...view detail...
M8 Melt Pressure Monitoring System (1/4 DIN)
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s...view detail...
M9 Melt Pressure and Temperature Monitoring System (1/4 DIN)
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s...view detail...
W0 Melt Pressure Control System (1/4 DIN)
Indicator Economically priced Displays pressure in a 5-digit LED display Auto zero Auto s...view detail...
W7 Melt Pressure Monitoring System (1/8 DIN)
Indicator Economically priced Displays pressure in a 5-digit LED display Auto zero Auto s...view detail...
W8 Melt Pressure Monitoring System (1/4 DIN)
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s...view detail...
W9 Melt Pressure and Temperature Monitoring System (1/4 DIN)
Indicator Economically priced Displays pressure in a 4-digit LED display Auto zero Auto s...view detail...
Rupture disks, also known as burst plugs or soft plugs, are used for emergency pressure relief of an extruder. They are designed to instantaneously rupture at a sp...view detail...
CT Mounting Hole Cleaning Tool Kit
The Cleaning Tool Kit is used to remove excess plastic from transducer mounting holes prior to installation. Installation of transducers into plugged and/or dirty mounti...view detail...
A properly machined mounting hole is vital to optimal operation of a melt pressure transducer or transmitter. Poorly machined holes can result in damage that causes unre...view detail...
Extension cables (6-pin and 8-pin)
Use to connect Gefran ISI, Inc. transducer to indicators ...view detail...
MK4A Contactless magnetostrictive linear position transducer (ANALOG OUTPUT)
Contactless linear position transducer with magnetostrictive technology. The absence of electrical contact on the cursor eliminates all wear and guarantees almost...view detail...
MK4D Contactless magnetostrictive linear position transducer (DIGITAL OUTPUT)
Contactless linear position transducer with magnetostrictive technology with Start/Stop or PWM digital output interface. The absence of electrical contact on the cursor ...view detail...
MK4S Contactless magnetostrictive linear position transducer (SYNCHRONOUS SERIAL OUTPUT)
Contactless magnetostrictive linear position transducer with RS422-SSI digital output interface. The absence of electrical contact on the cursor eliminates all wear and ...view detail...
MK4P Contactless rectilinear magnetostrictive displacement transducer (Profibus output)
Contactless absolute linear displacement transducer with magnetostrictive technology. The Profibus fieldbus communication interface permits integration in complex system...view detail...
MK4C Contactless magnetostrictive linear position transducer (CANopen OUTPUT)
Contactless linear position transducer with magnetostrictive technology. The absence of electrical contact on the cursor eliminates all wear and guarantees almost unlimi...view detail...
RK-4 Contactless magnetostrictive linear position transducer with threaded head
Contactless linear position transducer with magnetostrictive technology: the absence of electrical contact on the cursor eliminates problems of wear and consumption and ...view detail...
RK-2 Contactless magnetostrictive linear position transducer with flanged head
Contactless linear position transducer with magnetostrictive technology: the absence of electrical contact on the cursor eliminates problems of wear and consumption and ...view detail...
IK4-S Contactless magnetostrictive linear position transducer (SYNCHRONOUS SERIAL OUTPUT)
Contactless magnetostrictive linear position transducer with RS422-SSI digital output interface. The absence of electrical contact on the cursor eliminates all wear and guarantees almost unlimi...view detail...
IK4C Contactless magnetostrictive linear position transducer (CANopen OUTPUT)
The IK4 CANopen integrates a microprocessor to process the measurement and to diagnose the transducer. The CAN field bus communication system provides fast and safe tran...view detail...
IK4A Contactless magnetostrictive linear position transducer (ANALOG OUTPUT)
Contactless linear position transducer with magnetostrictive technology. The analog interface, available with various output ranges in voltage or in current, guarantees ...view detail...
IK2P Contactless rectilinear magnetostrictive displacement transducer (Profibus output)
Contactless absolute linear displacement transducer with magnetostrictive technology. The Profibus fieldbus communication interface permits integration in complex system...view detail...
LT Rectilinear displacement transducer
The transducer has been improved in order to guarantee greater reliability under all con...view detail...
PC Selfloading rectilinear displacement transducer with cylindrical case
50 to 750 mm stroke Mechanical fixing and selfaligning linkage using 2 bal...view detail...
PK Rodless rectilinear displacement transducer
The transducer has been improved in order to guarantee greater reliability under all con...view detail...
PA1 Rectilinear displacement transducer
25 to 150 mm stroke Mechanical linkage using joint with take-up of play, M...view detail...
PY1 Rectilinear displacement transducer
25 to 150 mm stroke Mechanical linkage using joint with take up of play, M...view detail...
PY2 Rectilinear displacement transducer
10 to 100 mm stroke Double support of the control rod and return spring ...view detail...
PY3 Rectilinear displacement transducer
10 to 50 mm stroke Double support of the control rod and return spring ...view detail...
PZ12 Rectilinear displacement transducer with cylindrical case
The 1/2” cylindrical housing, plus the option of all fastening systems (brackets, joi...view detail...
PZ34 Rectilinear displacement transducer with cylindrical case
25 to 300 mm stroke Mechanical fixing using brackets, selfaligning ball-jo...view detail...
PMI Rectilinear displacement transducer with magnetic drag - Patent pending
50 to 1000 mm strokes Cursor magnetic drag Independent linea...view detail...
PMA Self-supporting linear position transducer with magnetic pulling - Patent pending
Strokes from 50 to 1000 mm Magnetic pulling of cursor Mechan...view detail...
IC Rectilinear displacement transducer for mounting inside hydraulic actuators
100 to 550 mm stroke Mechanical fixing by internal or external flange ...view detail...
LT67 Rectilinear displacement transducer with IP67 protection
This transducer is designed to guarantee a high protection level (IP67) in applicati...view detail...
PC67 Selfloading rectilinear displacement transducer with IP67 protection degree
The PC67 displacement transducer was developed to guarantee a high protection level (IP6...view detail...
PZ67-A Rectilinear displacement transducer with IP67 protection level
This transducer is designed to guarantee a high protection level (IP67) in applications ...view detail...
PZ67-S Rectilinear displacement transducer with IP67 protection level
>This transducer is designed to guarantee a high protection level (IP67) in applications...view detail...
PME Rectilinear displacement transducer with magnetic drag
Rectilinear displacement transducer without drag shaft, completely water-tight (IP67), d...view detail...
PMI-SL Rectilinear Displacement Transducer with magnetic drag
The PMI-SL transducer, an evolution of the PMI-12, is designed for all inside cylinder a...view detail...
PMI-SLE Rectilinear displacement transducer with magnetic drag (analog output)
The PMI-SLE transducer, is the amplified version of the PMI-SL, a product designed for a...view detail...
PS Rotative position transducers in conductive plastic
Models 09, 11, 20 Servo mounting Independent linearity up to...view detail...
PR65 Rotative position transducers in conductive plastic
Sealed industrial version Independent linearity up to ± 0.05% (standa...view detail...
EG01_EG02 Pulse rotation encoders
Monodirectional encoder with position hysteresis; outputs x1, x2, x4 (EG01) ...view detail...
Tachometer with analogue output proportional to the speed and digital output ...view detail...
The signal conditioner with 0...10 Vdc (PCIR 101) or 4...20 mA (PCIR 102) output for displacement transducers are manufactured with a single SMD circuit with high stabil...view detail...
PCIR Signal conditioner for linear or rotative displacement transducers
The PCIR signal conditioners have been designed to enable the user to adapt the output impedance of linear or rotative displacement transducers in conductive plastic for...view detail...
TC1 Thermocouple for use in the plastics industry
Max. temperature limit: -40...+250°C (see table for thermocouple cable used) ...view detail...
TC1M Mineral oxide thermocouple for use in various industrial sectors
Max. temperature limit: - 40 ... + 310°C for type T - 40 ... + 550...view detail...
TC3 Thermocouples for Temperature Measure in General Applications
Temperature limits: -40 ... +250°C Tolerance: UNI 7938, IEC 584.2 Standar...view detail...
T4F Thermoelements for Temperature Measure of Fixed Surfaces
Temperature limits:: - 40 ... + 250° C Tolerance: Norme UNI 7938 standa...view detail...
T4P Thermoelements for Temperature Measure of Fixed Surfaces
Temperature limits: -40 ... +250°C Tolerance: UNI 7938 , IEC 584.2 Standa...view detail...
TC5 Thermocouple for use in the plastics industry
Max. temperature limit: - 40 ... + 250°C (see table for thermocou...view detail...
TC5N Thermocouple for use in the plastics industry
Max. temperature limit: - 40 ... + 250°C (see table for thermocoupl...view detail...
TC5M Thermocouple with MgO isolation for use in various industrial sectors
Max. temperature limit: type J: - 40 ... + 370°C type K: -40...+950...view detail...
TCM Mineral oxide thermocouple for use in the plastics industry
Max. temperature limit: - 40 ... + 400°C Reference tolerances:...view detail...
TC6 Thermocouples for use in a wide range of industrial applications
Temperature limits: -40 ... +350°C for type T -40 ... +750°C for t...view detail...
AC6 Thermocouples for use in a wide range of industrial applications
Temperature limits: -40 ... +350°C for type T -40 ... +750°C for t...view detail...
T4A Thermoelements for Temperature Measure of Fixed Surfaces
Temperature limits: - 40 ... +250°C Tolerance: Norme UNI 7938 ...view detail...
TC6M Mineral Oxide Thermocouples for a wide range of industrial applications
Temperature limits: - 40 ... + 350° C for type T - 40 ... + 750° C...view detail...
AC6M Mineral Oxide Thermocouples for a wide range of industrial applications
Amplified output signal o Temperature limits: -40 ... +350°C for type T ...view detail...
TC7M Thermocouples for measurement of temperature in general applications
Temperature limits: - 40 ... + 310° C for type T - 40 ... + 550° C...view detail...
TC2 Thermocouples with Interchangeable Insert for measure in industrial processes and furnaces
Temperature limits: -40 ... + 350°C for type T -40 ... + 550°C f...view detail...
AC2 Thermocouples with interchangeable insert for measure in industrial processes and furnaces
Amplified output signal Temperature limits: -40 ... + 350°C fo...view detail...
Temperature limits: -40 ... +350°C for type T -40 ... +550°C for t...view detail...
TC8 Thermocouples for the Steel Industry
Temperature limits: -40 ... +750°C for type J -40 ... +900°C for t...view detail...
AC8 Thermocouples for the Steel Industry
Amplified output signal Temperature limits: - 40 ... + 750° C ...view detail...
TC9 Thermocouples for the Steel Industry
Temperature limits: - 40 ... + 1200° C for type K 0 ... + 1400° C ...view detail...
AC9 Thermocouples for the Steel Industry
Amplified output signal Temperature limits: -40 ... +1200°C for...view detail...
TC10 Thermocouples for the Steel Industry
Temperature limits: -40 ... +750°C for type J -40 ... +1200°C fo...view detail...
TCPM Thermocouple with MgO isolation for industrial use
Max. temperature limit: - 40 ... + 310° C for type T - 40 ... + 55...view detail...
TR1 Resistance Thermometers for the Plastics Industry
Temperature limits: -40 ... +250°C (see table for type of extensi...view detail...
TR1M Mineral oxide resistance thermometers for a wide range of industrial applications
Temperature limits: - 200 ... +600°C Tolerance: UNI 7937, IEC ...view detail...
TR5 Resistance Thermometers for the Plastics Industry
Temperature limits: -40 ... +250°C (see table for type of extensi...view detail...
TR5N Resistance Thermometers for the Measure of Temperature on Extruders
Temperature limits: -40 ... +250°C (see table for the type of used thermocou...view detail...
TRM Mineral insulated resistance thermometers for the plastics industry
Temperature limits: - 40 ... + 400° C Tolerance: UNI 7937, IEC 751 standa...view detail...
TRD Resistance thermometers for monitoring of dykes
Temperature limits: -40 ... +150°C Tolerance: UNI 7937, IEC 751 standards...view detail...
TR6 Resistance thermometers for a wide range of industrial applications
Temperature limits: - 40 ... + 300° C Tolerance: UNI 7937, IEC 751 standa...view detail...
AR6 Resistance thermometers for a wide range of industrial applications
Transmitter 4...20mA Amplified output signal Temperature lim...view detail...
TR6M Mineral oxide resistance thermometers for a wide range of industrial applications
Temperature Limits: -200 ... +600° C Tolerance: UNI 7937, IEC ...view detail...
AR6M Mineral oxide resistance thermometers for a wide range of industrial applications
4...20mA Transmitter Amplified output signal Temperature lim...view detail...
TR7M Resistance thermometers for measurement of temperature in general applications
Temperature limits: -200 ... +600°C Tolerance: UNI 7937, IEC 7...view detail...
Temperature Limits: -200 ... +600° C Tollerance: UNI 7937, IEC...view detail...
Amplified output signal Temperature limits: -200 ... +600°C ...view detail...
TRI MgO Resistance thermometer inserts
Temperature limits: - 200 ... +800°C Tolerance: UNI 7937, IEC ...view detail...
TRA Resistance thermometer for measurement of room temperature
Max. temperature limit: - 40 ... + 90° C Reference tolerances:...view detail...
TRPM Resistance thermometer with MgO isolation for industrial use
Max. temperature limit: - 40 ... + 600° C Reference tolerances:...view detail...
Thermocouple Extension and Compensating Cables, Sheaths, Fittings, Connection Heads
Extension and compensation cables for Thermocouples Protective sheathings ...view detail...
TR Force transducer for measuring the tension on fixed or rotating spindles
TR series force transducers are used to measure the tension that plastic films or tapes exert on the guide rollers of the machinery used to coil them. Mounted at ...view detail...
CM Load cell for compression applications
CM series load cells are strain gauge transducers used to measure loads in static and dynamic applications, in compression, with high accuracy. They are machined ...view detail...
CU Compact load cell for compression applications
The CU range of load cells are designed for the measurement of static or dynamic loads in compression. All the transducers are calibrated as load cells in units o...view detail...
AM Miniature force transducer for compression applications
The AM force transducers series have been designed to measure static and dynamic compression forces. They are particularly suitable for monitoring pounding operat...view detail...
TC Load cell for tension/compression applications
TC series load cells are strain gauge transducers used to measure loads in static and dynamic applications, in tension and compression, with high accuracy (industrial we...view detail...
TU Compact load cell for tension/compression applications
The TU range of load cells are designed for the measurement of static or dynamic loads in compression or traction. All the transducers are calibrated as load cell...view detail...
TH Force transducer for tension/compression applications
The TH series force transducers are ideal for systems that measure tension or compression force in industrial applications, where accuracy and reliability are important,...view detail...
CC Cylindrical force transducer for industrial applications
The CC force transducers have been designed for use in the plastics industry where it is required to measure the reaction force to the extrusion pressure that is present...view detail...
CT Toroidal force transducer for industrial applications
The CT series force transducers, have been specially designed for use in polymer processing in applications where it is required to measure the reaction force produced b...view detail...
SB Low profile shear load cell
The principle of measurement of the SB series of load cells is the deformation caused by the shear generated by the applied load. They are compact load cells with an all...view detail...
The principle of measurement of the SH series load cells is the deformation caused by the shear generated by the applied load. The result is a transducer that is e...view detail...
CB series load cells are designed for trouble free application in industrial environments. The cell body and the protective bellows of the strain gauge are in cor...view detail...
OC Low profile load cell for platforms
The OC series load cells have been designed for all applications requiring accurate weighing of loads on a platform, as well as for general applications in conformity wi...view detail...
OD Load cell for packaging and dosing applications
The OD series load cells have been designed for all applications requiring accurate weighing of loads on a platform, as well as for general applications in conformity wi...view detail...
CIR-D Galvanically isolated strian gauge transducer amplifier
The CIR-D voltage or current amplifiers have been designed to enable the user to adapt non-amplified strain gauge transducers (load cells, pressure transducers) to acqui...view detail...
CIR Strain gauge transducer amplifier
The CIR voltage or current amplifiers have been designed to enable the user to adapt non-amplified strain gauge transducers (load cells, pressure transducers) to acquisi...view detail...
TK transmitters are based on the thick film extensimetric. Thanks to highly stable electronic components, these transmitters can be used in applications requiring...view detail...
Series TSA transmitters are based on silicon piezoresistive sensing element in wheatstone bridge configuration. Thanks to highly stable electronic components, th...view detail...
TPF Pressure transducer with flush measurement diaphragm
TPF Series flush diaphragm pressure transducers are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 PH st...view detail...
Series TPSA transmitters are based on the extensimetric measurement principle. An innovative mechanical structure makes the transducer completely insensitive to t...view detail...
TPH Transducer for high-pressure
Series TPH transducers are designed for applications in high-pressure hydraulic circuits. It uses the extensimetric measurement principle with photo-engraved met...view detail...
TPHA Transmitter for high-pressure
Series TPHA transmitters are designed for applications in high-pressure hydraulic circuits. It uses the extensimetric measurement principle with photoengraved met...view detail...
XSA Pressure transmitters for applications in hazardous areas
The XSA transducers are based on the piezoresistive measurement principle. The mechanical structure makes the transducer insensitive during the tightening phase. ...view detail...
XPSA Pressure transmitters for applications in hazardous areas
The XPSA transducers are based on the extensimetric measurement principle. The mechanical structure makes the transducer insensitive during the tightening phase....view detail...
Series TPS transducers are based on the extensimetric measurement principle with strain gauges on metal base. An innovative mechanical structure makes the transd...view detail...
TDP Plug-in display for transmitters
The model TDP plug-in display is a universal local display suitable for use with various transmitters. The transmitter must be fitted with an analogue output and a conne...view detail...
TKDA Digital autozero & span option
Digital “Autozero & Span” option makes the pressure transmitter TK Series a product extremely innovative and versatile. Designed thanks to the advanced electronics u...view detail...
TPSADA Digital autozero & span option
Digital “Autozero & Span” option makes the pressure transmitter TPSA Series a product extremely innovative and versatile. Designed thanks to the advanced electronics...view detail...
TPFADA flush diaphragm Pressure Transmitter with digital Autozero & Span
TPFADA Series flush diaphragm pressure transmitters are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 P...view detail...
