SieiDrive - XVy-EV series servodrives offer advanced technology for drives used in Motion Control applications, their high-bandwidth, powerful DSP and highly reliable power stage allows the drives to provide excellent control for a vast range of brushless servomotors and asyncronous motors.
XVy–EV implements next generation functions as a standard, to perfectly meet the most advanced architectures of the most modern industrial servo systems.
The integration in the drive of dedicated application software programs allows for unique customisations, to suit specific controls of complex machineries in sectors such as: working machineries for plastic material, sheet metal, textiles, wood, marble and printing presses, as well as in the most advanced automation solutions.
Flexible and powerful, XVy-EV can offer two programming modes for the intuitive implementation of both simple architectures and complex control systems.
Functions:
Double control for brushless motors and for asyncronous motors
Self-tuning of current regulator
7 programmable multispeed
4 independent programmable ramps (Acc/Dec and CW/CCW)
Encoder repetition / Auxiliary encoder
Jog function
Motor potentiometer function
“Speed Draw†function
Drive overload protection through I x T algorithm (for exceptional performances) and I2T (for standard overloads IEC146)
Thermal I2t protection for motor and braking resistor
Motor stationary braking management
“Coast through†and “Power loss stop†functions
“Helper†function via Fast Link
Drive working modes:
- Torque and/or Speed
- Position:standard positioning device and sequential multi-position controller
- ELS,Electronic Line Shaft
Linear motors control
Field bus management: Profibus, CANopen, DeviceNet, Ethernet and internal Fast Link
Options:
Expansion boards for signal encoder repetition
I/O expansion boards useful according to the machine needs
Absolute encoder management with SSI, EnDat 2.2 and Hyperface protocols
Profibus-DP and GDnet field bus interface
Communication kit for internal Fast Link
Safety cards (motor side inhibition)
Developing tool for IEC 61131-3 standards: MDPlc 51.10
Software key enabling for DeviceNet interface: CODE DN-XVy
Standardised application SW programs in PLC mode
SHJ and SBM brushless servomotor series with powers up to 442Nm
Dedicated EMC filters (in compliance with CEE - EN61800 - 3:2004)
Input and Output chokes (standardized for the whole line)
Remote programming keypad kit
RS485 serial line kit for PC connection
Servodrives, from 1.5kW (2Hp) up to 315kW (450Hp)
* 3 x 230Vac…480Vac, 50/60Hz
* Motor powers from 1.5kW (2Hp) up to 315kW (450Hp)
* IP20 protection degree standard (external heatsink predisposition for IP54 mounting 15kW-20Hp)
* Marks: CE, UL, cUL
Features:
Torque and/or Speed control
Positioning control (64 programmable registers)
Electronic Line Shaft function
Programmable digital inputs/outputs
Internal “Fast Link†bus at 3.125 Mbit/sec
CANopen interface (slave)
Current ratings [Arms]: from 3A up to 560A nominal (from 6A up to 800A of peak)
Maximum output frequency up to 450Hz (according to the drive power)
Braking Unit and Resistor integrated up to 15kW (20Hp) drive size
Optional integrated Braking Unit up to 55kW (60Hp) drive size
2 Differential analog inputs ±10Vdc (11bit + sign)
2 Analog outputs ±10Vdc (11bit + sign)
Digital I/O commands in PNP and/or NPN logic
8 Digital inputs
6 Digital output opto-coupled
1 Digital relay output (NC-NO)
1 RS485 serial input (Modbus RTU protocol)
2 Inputs for internal “Fast Link†bus
1 CANopen interface input (slave)
1 Encoder / resolver input
1 Auxiliary encoder input / repeater
Selectable speed feedback :
. Incremental TTL (+5V) encoder + 3 Hall effect sensors
. Sinusoidal 1Vpp (+5V) encoder + 2 SinCos trackes or 3 Hall effect sensors
. 3 Hall effect sensors for positioning Single-Ended signal
. Absolute signal with 2 SinCos trackes
. Sinusoidal 1Vpp (+5V) or Incremental TTL (+5V) encoder
. Two pole Resolver
Programming keypad with alphanumeric display (KBXV-EV)
Keyboard with memory for the drive parameter file
IP20 protection degree standard (external heatsink predisposition for IP54 mounting 32550 size).
IP00 protection degree for sizes 9470670 and 9560800, available also on C and CP models.
